PRODUCT

Hot Vulcanized Ceramic Lagging(15%. 39%. 58% Ceramic tile coverage)
Hot Vulcanized ceramic lagging solves the glue failure problem caused by moist, low temperature and other factors. And retained all advantages of ceramic lagging.
Hot vulcanized ceramic lagging offers improved, lasting pulley protection against abuse of abrasive materials, corroding effects of moisture

Hot Vulcanized ceramic lagging solves the glue failure problem caused by moist, low temperature and other factors. And retained all advantages of ceramic lagging.

Hot vulcanized ceramic lagging offers improved, lasting pulley protection against abuse of abrasive materials, corroding effects of moisture

Hot Vulcanized ceramic lagging provides an advanced solution for extreme high-wear, high-tension, contaminated and/or wet operating environments, where conventional lagging often wears prematurely and causes slippage.

 

1.Suitable for acid & alkali resistant conveyor system

2.Suitable for conveyor system damaged by bulk materials

3.Superior lubricating performance, suitable for bend pulley and counterweight pulley

4.Fast and easy installation

5.Low temperature resistant ( -45 C)

6.Service life > 60000 hours

 

Ceramic tiles

Al2O3 content

92%, 95%

Volume density

>3.65 ~ 4.5g/cm3

Tensile strength

20 Mpa

Compressive strength

200 Mpa

Hardness ( Mohs)

> 9t

Water Absorption

< 0.02

Abrasion

< 120 mm4

Rubber

Polymer

NR / SBR

Specific Gravity

1.2 +/- 0.03

Shore a (hardness )

65+/- 5

Elongation at break.

400 %

Tensile strength.

17 N/mm2

Abrasion Loss

< 120 mm3

 

Commodity

Thickness. mm

Width. mm

Length. mm

Normal Ceramic Lagging 

Flame Retardant Ceramic Lagging

12 / 15 / 18 / 20

250 / 500

Customized

12 / 15 / 18 / 20

250 / 500

 

Quality control from Hongxin Rubber (2).jpg

Service item:

  1. DCCD ®/ HONGXIN® RUBBER provides complete technical support to ensure the products installed in time and run safety.

  2. The main purpose of technical support is to solve the products or technical problems which are beyond to the clients.

  3. Clients should provide necessary assistance during the services.

     

Service Mode:

  1. Communications support: the engineers help to solve the problems by various means of communication, main including phone answer, video or graphic by email.

  2. Field support: onsite install and guide service is available according to clients requirement

     

Working Procedure:

  1. For clients requirements, we will react quickly with 24 hours, no more than 48 hours at the latest.

  2. Give solutions by telephone

  3. The solution was obtained by experiment, then notify the clients.

 

worldwide distributor of Hongxin Rubber.png

Agency Cooperation Policy from Hongxin Rubber.png

CONTACT US If you would like to know more about the product, please contact us !
Please fill in your procurement needs and contact information.
  • Products :
  • * Your inquiry:
  • * Your email :
  • Your tel :
  • Your name :
  • Your company :
  • Your country :
  •