PRODUCT

PVC Solid Woven Conveyor Belt
Both top and bottom covers are PVC, thickness of each side can be up to 4 mm, the belt has much more advantages than non-pressed PVC belt on impact resistance, water, with longer service life, higher fastener holding.
The pressed PVC belt has higher strength compared to the ordinary PVC conveyor belt at the same level, the pressed conveyor belt with a body structure further optimized and higher internal bond strength

Both top and bottom covers are PVC, thickness of each side can be up to 4 mm, the belt has much more advantages than non-pressed PVC belt on impact resistance, water, with longer service life, higher fastener holding.

The pressed PVC belt has higher strength compared to the ordinary PVC conveyor belt at the same level, the pressed conveyor belt with a body structure further optimized and higher internal bond strength.

 

1.High tensile strength. The pressed PVC belt has higher strength compared to the ordinary PVC conveyor belt at the same level, the pressed conveyor belt with a body structure further optimized and higher internal bond strength.


2.Excellent joint performance. The belt can adopt mechanical joints, also it can make use of vulcanized joints. The joints efficiency is high, and it allow the joints quick finished within poor work situation.

 

Function  NameThe alcohol  CombustionThe propane  combustionConduct  electricity the functionThe roller rubber
Standard ValveAverage  value ≦ 3s, List value ≦ 10s ( have the cover gum)≧ 250 mm≦ 3 * 108 Ω≦  325
Average value ≦ 5s, List value ≦ 15s (  have no cover gum)Have  no Mars

 

Standard MT 914-2008

Selection Safety Coefficient 10 ( Tensile Strength * 1/10)

Slope < 16°

Standard Type

Corresponding Grade

Tensile Strength, ≧ N/mm

Elongation,≧ %

Suggested Min-diameter of Transmission Drum

Longitudinal

Horizontal

Longitudinal

Horizontal

680S

4

680

265

15

18

320

800S

5

800

280

400

1000S

6

1000

300

500

1250S

7

1250

350

500

1400S

8

1400

350

630

1600S

9

1600

400

750

 

Tensile Strength:500 ~ 2500 N/mm


Width: 500 ~ 2000 mm

 

Quality control from Hongxin Rubber (2).jpg

Service item:

  1. DCCD ®/ HONGXIN® RUBBER provides complete technical support to ensure the products installed in time and run safety.

  2. The main purpose of technical support is to solve the products or technical problems which are beyond to the clients.

  3. Clients should provide necessary assistance during the services.

     

Service Mode:


  1. Communications support: the engineers help to solve the problems by various means of communication, main including phone answer, video or graphic by email.

  2. Field support: onsite install and guide service is available according to clients requirement

     

Working Procedure:


  1. For clients requirements, we will react quickly with 24 hours, no more than 48 hours at the latest.

  2. Give solutions by telephone

    The solution was obtained by experiment, then notify the clients.

worldwide distributor of Hongxin Rubber.png

Agency Cooperation Policy from Hongxin Rubber.png

CONTACT US If you would like to know more about the product, please contact us !
Please fill in your procurement needs and contact information.
  • Products :
  • * Your inquiry:
  • * Your email :
  • Your tel :
  • Your name :
  • Your company :
  • Your country :
  •