PRODUCT

DCCD® Tungsten primary belt cleaner
DCCD® Tungsten belt cleaner suitable for conveyor system under extreme working conditions.
DCCD® Tungsten primary belt cleaner is mainly used to clean the belt with a belt width of 500 ~1600 mm.

DCCD® Tungsten primary belt cleaner is mainly used to clean the belt with a belt width of 500 ~1600 mm.

The Tungsten blade can cleaning the attached material on the belt greatly, special suitable for high speed conveyor system. ( Belt speed > 3.5 m/s )

 

1. The welding area is smooth and has no bubbles and bumps, the bearing capacity is stronger.
2. The alloy cleaner blade is the wearest type.
3. The applicable temperature is -45 ℃~150 ℃.
4. Using high strength carbon steel - 35 # steel.
5. According to customer’s different needs, the thickness of the square steel which is in the middle of the cleaner can be increased to enhance the strength of the cleaner.
6. The tensioning system is fully sealed to increase the service life.
7. Suitable to the conveyor belt speed>3.5m/s.

Band Width
(mm)

Band Speed
(m/s)

Cleaning material

    sort

Material Moisture

Working temperature

The Available Abrasive Height

500

~2400

≤5

Clay/

Coal/

Limestone

/Mineral

≤15%

-35~80℃
(Common)

8

 

Model No.

B

D

G

L1

L2

α

DX.No.

DT.No.

DCCD500A-1

500

500

1200

402

108

30


DT1EJH3

DCCD650A-1

650

500

1300

402

108


DT2EJH3

630

434

164


DT2EJH4

DCCD800A-1

800

500

1500

402

108


DT3EJH3

630

434

164


DT3EJH4

800

490

323

DX3EJH3

DT3EJH5

1000

515

418

15

DX3EJH4


1250

548

540

DX3EJH5


1400

566

612

DX3EJH6


1600

592

709

DX3EJH7


DCCD1000A-1

1000

630

1700

434

164

30


DT4EJH4

800

490

323

15

DX4EJH3

DT4EJH5

1000

515

418

DX4EJH4

DT4EJH6

1250

548

540

DX4EJH5


1400

566

612

DX4EJH6


1600

592

709

DX4EJH7


DCCD1200A-1

1200

630

1900

434

164

30



800

490

323

15

DX5EJH3


1000

515

515

DX5EJH4


1250

548

540

DX5EJH5


Model No.

B

D

G

L1

L2

α

DX.No.

DT.No.

DCCD1200A-1

1200

1400

1900

566

612

15°

DX5EJH6


1600

592

709

DX5EJH7


DCCD1400A-1

1400

800

2100

490

323

DX6EJH3

DT6EJH5

1000

515

418

DX6EJH4

DT6EJH6

1250

548

540

DX6EJH5

DT6EJH7

1400

566

612

DX6EJH6

DT6EJH8

1600

592

709

DX6EJH7


DCCD1600A-1

1600

1000

2300

515

418

DX7EJH4


1250

548

540

DX7EJH5


1400

566

612

DX7EJH6


1600

592

709

DX7EJH7


DCCD1800A-1

1800

1000

2500

515

418

DX8EJH4


1250

548

540

DX8EJH5


1400

566

612

DX8EJH6


1600

592

709

DX8EJH7


DCCD2000A-1

2000

1000

2700

515

418

DX9EJH4


1250

548

540

DX9EJH5


1400

566

612

DX9EJH6


1600

592

709

DX9EJH7


 

Quality control from Hongxin Rubber (2).jpg

Service item:

  1. DCCD ®/ HONGXIN® RUBBER provides complete technical support to ensure the products installed in time and run safety.

  2. The main purpose of technical support is to solve the products or technical problems which are beyond to the clients.

  3. Clients should provide necessary assistance during the services.

     

     

Service Mode:


  1. Communications support: the engineers help to solve the problems by various means of communication, main including phone answer, video or graphic by email.

  2. Field support: onsite install and guide service is available according to clients requirement

     

Working Procedure:


  1. For clients requirements, we will react quickly with 24 hours, no more than 48 hours at the latest.

  2. Give solutions by telephone

  3. The solution was obtained by experiment, then notify the clients.

 

worldwide distributor of Hongxin Rubber.png

Agency Cooperation Policy from Hongxin Rubber.png

CONTACT US If you would like to know more about the product, please contact us !
Please fill in your procurement needs and contact information.
  • Products :
  • * Your inquiry:
  • * Your email :
  • Your tel :
  • Your name :
  • Your company :
  • Your country :
  •