PRODUCT

DCCD® brush belt cleaner
DCCD® brush belt cleaner suitable for all belt cleaning under various working conditions.
DCCD® brush belt cleaner installed below the working face of the conveyor belt, the brush can remove the coal dust, mud, powdery and other viscous bulk material, special suitable for cleaning on the chevron belt

DCCD® brush belt cleaner suitable for all belt cleaning under various working conditions.

DCCD® brush belt cleaner installed below the working face of the conveyor belt, the brush can remove the coal dust, mud, powdery and other viscous bulk material, special suitable for cleaning on the chevron belt

Rotary type belt cleaner installed below the working face of the conveyor belt, its driven by auto motor or driving pulley, the brush tip and conveyor belt contacted slightly, the rotation direction of the cleaning brush is opposite to that of the return belt, thus, the particles stuck to the belt surface are brushed off, achieve the goal of thorough cleaning.

 

1. Using high-strength and high wear-resistant nylon to improve cleaning efficiency
2. Using integrated design to achieve simple and fast installation and debugging.
3. The motor is waterproof and anti-static, suitable for harsh environments.
4. There are standard type and explosion-proof type for choice. 

Electric roller brush cleaner (General Model )

Total Length

Shaft diameter

Dia. Of brush

Motor Power

Belt width+655

37

240

1.5

Electric roller brush cleaner ( Explosion Proof Model)

Total Length

Shaft diameter

Dia. Of brush

Motor Power

Belt width+655

40

240

2.2

 

Model

Belt width

Length of brush

Motor Power

Speed rate

DCCD500-4

500

600

1.5 KW

1/10

DCCD650-4

650

750

DCCD800-4

800

900

DCCD1000-4

1000

1100

2.2KW

1/10

DCCD1200-4

1200

1300

DCCD1400-4

1400

1500

DCCD1600-4

1600

1700

3.0 KW

1/10

DCCD1800-4

1800

1900

 

Quality control from Hongxin Rubber (2).jpg

Service item:

  1. DCCD ®/ HONGXIN® RUBBER provides complete technical support to ensure the products installed in time and run safety.

  2. The main purpose of technical support is to solve the products or technical problems which are beyond to the clients.

  3. Clients should provide necessary assistance during the services.

     

     

Service Mode:


  1. Communications support: the engineers help to solve the problems by various means of communication, main including phone answer, video or graphic by email.

  2. Field support: onsite install and guide service is available according to clients requirement

     

Working Procedure:


  1. For clients requirements, we will react quickly with 24 hours, no more than 48 hours at the latest.

  2. Give solutions by telephone

  3. The solution was obtained by experiment, then notify the clients.

 

worldwide distributor of Hongxin Rubber.png

Agency Cooperation Policy from Hongxin Rubber.png

CONTACT US If you would like to know more about the product, please contact us !
Please fill in your procurement needs and contact information.
  • Products :
  • * Your inquiry:
  • * Your email :
  • Your tel :
  • Your name :
  • Your company :
  • Your country :
  •