Impact Bed And Bar
Belt Repair Material
DCCD® v return belt cleaner suitable for all belt cleaning under various working conditions.
DCCD® V return belt cleaner is one of the most widely used cleaners in the cleaning system, the V return belt cleaner installed on the non-working surface of conveyor belt, the main purpose is to remove the attached bulk material on the non-working surface of the belt and discharge materials to both sides.
DCCD® v return belt cleaner is mainly used to clean the belt with a belt width of 650 ~2200 mm.
The blades of V return cleaner is made of polyurethane material, the polyurethane (pu) has good performance of wear resistant, corrosion resistant, anti-hydrolysis, belt friendly, no sticky material and long service life.
1. The welding area is smooth and has no bubbles and bumps, the bearing capacity is stronger.
2. The polyurethane cleaner blade has no bubbles on surface, enhancing wear resistance.
3. The applicable temperature is -45 ℃~60 ℃.
4. Using high strength carbon steel - 35 # steel.
5. V-shaped design, the bulk materials will be automatically cleaned off to both sides of the conveyor belt.
6. The design of the frame can be applied to different conveyor brackets.
Blade hardness shore a
Elongation at break. %
30 / mm2
Thickness of angle steel
DCCD ®/ HONGXIN® RUBBER provides complete technical support to ensure the products installed in time and run safety.
The main purpose of technical support is to solve the products or technical problems which are beyond to the clients.
Clients should provide necessary assistance during the services.
Communications support: the engineers help to solve the problems by various means of communication, main including phone answer, video or graphic by email.
Field support: onsite install and guide service is available according to clients requirement
For clients requirements, we will react quickly with 24 hours, no more than 48 hours at the latest.
Give solutions by telephone
The solution was obtained by experiment, then notify the clients.